This is a high capacity, reliable battery for your iPhone 5. This iPhone 5 battery packs in a supreme power efficiency conversion ratio with no annoying memory effect, allowing you to always get the most out of your charges. This battery can act as a perfect iPhone 5 replacement battery or iPhone 5 spare battery due to its portable, lightweight design. This iPhone 5 battery is also safe due to overcharge, over-discharge and shortage protection functions. GearDo Australia’s warehouse is the best place for iPhone quality parts and accessories with competitive, wholesale prices and faster shipping than eBay, Amazon and JB Hi-Fi.
Here are some simple easy to follow instructions for replacing the battery in your iPhone 5:
1. Power off your device and remove the two 5-point Pentalobe screws at the bottom of the phone near the speakers. Remove these screws using a suitable screwdriver.
2. Secure your phones screen by applying packing tape if it is cracked or shattered, and then stick a suction cup to the part of the screen just above the home button. Use constant force and slowly but surely pry the screen away the phone, using a plastic opening tool around the edges to assist you. Be sure during this process to make sure the screen and the black plastic bezel underneath do not separate. If this begins to happen while removing the screen from the metal clips on the phone, use the opening tool to pry the bezel off the clips.
3. Once the clips have been removed you should be able to pull the screen off the iPhone. The screen will still be attached by way of the display cable at the top, so do not put any undue pressure on the cable. A good idea is to use an elastic band to attach the screen part to an unopened can of soft drink to keep the screen up in place while you can easily replace the battery
4. Remove two screws (Phillips 1.2mm and Phillips 1.6mm screws) to the right of the battery holding it in place. Do not remove the topmost screw of the three on this piece of metal.
5. Remove the metal bracket and then gently pry open the battery connector from its socket.
6. Remove the three screws (Two Phillips 1.2mm and one Phillips 1.6mm screws) next to the top right of the battery. Do not use a magnetized screwdriver here as you risk damaging the internal compass of the phone.
7. Lift this new bracket off the phone and then use the opening tool to disconnect the front facing camera, LCD and digitiser cables from the phone
8. Remove the front panel from the phone completely, and then remove the battery from the phone by pulling the clear tab to the right of the phone. If the tab breaks off with the battery still stuck, use a hairdryer to loosen adhesive holding the battery in and gently pry it off.
9. Insert the new battery and reattach all the cables, screws and brackets to the phone and reattach the screen to the phone.